Author Topic: 'dynamic-surround' frame sometimes not visible  (Read 3510 times)

hs2

  • Senior Community Member
  • Posts: 2735
  • Hero Points: 287
'dynamic-surround' frame sometimes not visible
« on: August 12, 2007, 09:51:14 am »
@SlickTeam:
Strange behaviour of 'dynamic-surround' when using Selective Display -> 'show-proc' with curr. procedure expanded or 'show-current-proc' (maybe more - didn't test all of them).
The dynamic-surround frame is not longer displayed. Just the small icon in the gutter is shown and the 'core-functionality' of the feature is still OK. Everything is fine again e.g. after 'show-all'.
If I manually hide some other code blocks or just 'hide-comments' it's also working w/ frame being visible.

HS2
« Last Edit: August 12, 2007, 09:59:19 am by hs2 »

hs2

  • Senior Community Member
  • Posts: 2735
  • Hero Points: 287
Re: 'dynamic-surround' frame sometimes not visible
« Reply #1 on: August 28, 2007, 12:04:27 pm »
Still applies to v12.03 - any confirmation/news about that ?
HS2

RobFreundlich

  • Community Member
  • Posts: 47
  • Hero Points: 2
Re: 'dynamic-surround' frame sometimes not visible
« Reply #2 on: September 14, 2007, 12:31:20 am »
The dynamic-surround frame is not longer displayed. Just the small icon in the gutter is shown and the 'core-functionality' of the feature is still OK. Everything is fine again e.g. after 'show-all'.

I'm seeing this happen too, even with selective display turned completely off.